Crumb Rubber Modified Asphalt Plant
- Model: LYXL1606, LYXL3515
- Product Capacity: 6 t/h ~ 15 t/h
- Highlights:
Producing stable and reliable crumb rubber asphalt;
Containerized structure, ease of transportation.
LYXL Series crumb rubber modified asphalt plant is used to produce rubberized asphalt concrete (RAC). Rubberized asphalt is a special pavement material consisting of approximately 75-80 percent regular asphalt with 20 percent (+/-2%) crumb rubber made from scrap tires. Rubber asphalt overlays on road surface make road smoother, effectively reduce traffic noise and prolong road service time, having bright future and wide application in highway construction. Meanwhile, crumb rubber modified bitumen plant recycles a large number of scrap tyres, helping to save resources and reduce pollution.
Crumb rubber made from scrap tires is loaded into the hopper before mixing begins and must be replenished during the mixing process. Next the screw conveyor carries the crumb rubber to the mixing chamber. Then, the crumb rubber is blended with virgin asphalt by a high shear mixer running at a speed of 3400 rpm. As the materials are mixed, they are pumped to the portable holding tank. During the mixing process, fresh materials are continuously fed into the chamber until the required volume of material has been mixed.
| Model | LYXL3515 | LYXL1606 | |
| Productivity | 10~15 t/h | 6 t/h | |
| Installed power | 150kW | 125kW | |
| Heating device | Heating capacity | 1,250,000kcal | 800,000kcal |
| Heat exchange area | 2x32m² | 1x32m² | |
| Heat exchange coefficient | (20t/h)60℃ | (20t/h)50℃ | |
| Measuring accuracy | ±0.5% | ±0.5% | |
| Rubber feeder | Screw conveyor capacity | 10m³/h | 10m³/h |
| Measuring accuracy (rubber powder) |
±0.5% | ±0.5% | |
| Base asphalt system | Max. flow rate | 1300 LPM | 1300 LPM |
| Mixer | Rotart speed | 2900 rpm | 2900 rpm |
| Drive motor | 11kW | 11kW | |
| Mixing capacity | ≥40m³/h | ≥40m³/h | |
| Reaction kettle | Asphalt rubber pump capcacity | ≤40m³/h | ≤40m³/h |
| Burner capacity | 2*20*104 | 1*20*104 | |
| Kettle capacity | 2*17.5m³ | 1*17.5m³ | |
| Agitator speed | 198 rpm | 198 rpm | |
| Agitator drive motor | 2*11kW | 1*11kW | |
| Reaction kettle dimension | L*W*H (mm) | 10700x2500x2900 | 11200x2500x2900 |
| Heat transfer oil furnace dimension |
L*W*H (mm) | 6800x2500x2800 | 6000x2500x2800 |
| Control room dimension | L*W*H (mm) | 3000x2500x2600 | / |
1. Compact frame structure, ease of transportation; intelligent control, convenient for operation, ensuring stable and reliable performance.
2. Advanced process technology, adopt American McDonald Technology.
3. Powerful heat transfer oil heater and large area heat ex-changer, reaction kettle is heated rapidly, ensuring the quality of finished rubber asphalt.
4. High performance homogenizing devices in tanks prevent material from segregation, precipitation and swelling.
5. Accuracy of the weighing system is less than 2%, proportion of crumb rubber powder is adjustable.
6. Production volume of each cycle can be set freely within the maximum productivity.
7. Tanks are made by anti-corrosion stainless steel with good heat insulation device, static insulation index is ≤12℃/8h.
8. Stainless steel plates are adopted for packaging for corrosion resistance.
Your inquiry will be replied within 24 hours.
